Showing posts with label Resin figures. Show all posts
Showing posts with label Resin figures. Show all posts

Sunday, September 15, 2013

54mm Figure Flashback; Cannonade Station and Civil War Union Infantrymen


I have to admit between my many hobbies, of model building I really enjoy figure modeling in the top of my favorite subjects. Of all that can be said of history, in the end the great and worst moments fell on the backs of people. Below are a few of the kits I have done in the last year. The first below is a Verlinden Cannonade Station. I liked this kit for it's detail on what normally is a very small part of a warship. I would have liked it better if some hand tools were included like the tampion, or a packer. 



The kit is completely resin, and a challenge to cut with a hobby knife. The securing rings were a challenge as well. The molded detail in the buckets and deck are fantastic.

The next kit is a group of Union Civil War infantryman from Dragon's Sword and Saber Series. The kit was first rate, with even small wire packing rods included. I scratchbuilt the wall and foliage, but may revisit it since I think is was a little sparse.




Thanks for viewing, have a great day!




Sunday, September 8, 2013

Container Ship Updates and My Resin Crusader

I tend to believe that every person hits a point on a model kit that you need to simply push through. I think I have hit it on this kit. I have STILL not finished the container stack painting. I did however take a look at the alternate decals that I got from Pacific Front/Free Time Hobbies. Here is a close up pic:


I also started painting the USCG Cutter Tampa in it's first stage white primer coat. I put her next to the container ship, cuz I can't help myself!


So while I was contemplating this project, I through a little paint on my medieval Crusader. I started the first coat on his "victim/opponent" and did some acrylics on the ground cover. So far so good. Yes he does look weird with zombie eyes. Washes will fix that!


I also played around with a busted up Stug tank in Flames of War. Since this was scrap and I didn't have a proper barrel for it I decided to make it a flaming objective marker. Here it is with oily smoke made of "chunky" woodland scenics flock.



Not a bad first time modeling smoke.
That is all for now. I will post more when I can. Thanks for looking!




Monday, June 3, 2013

Curved Acrylic Case Final Assembly

So I have been messing about with my acrylic tube display for my Verlinden 120mm Crusade Knight. Today I opted to make a top for the case from a scrap piece of acrylic I had laying around. I used my trusty Harbor Freight scroll saw to cut it out of a sharpie pattern I drew on the protective plastic wrap.
(As a note, wear eye protection when cutting acrylic, the "fuzz" will jump into your eyelashes and cause you a serious case of itchy peepers!)
Final not about cutting, I snapped my blade, not because of the acrylic, but because my tensioner knob had not bee tightened in some time. If you have a scroll saw, ensure you keep your tensioner relatively tight.


So I cut a circle out of acrylic stock, sanded the edges just a tad.



So I went to use my super awesome acrylic 15 nanosecond cement, and to my rude surprise, the stuff had totally evaporated!!! If you buy this stuff, you will need to store it in an airtight container!!!


Alas I was not set back, because I had also purchased trusty acrylic solvent #16. This stuff comes out of the tube like nothing I have ever worked with, it starts like toothpaste, then "goos" on like acetone. Be VERY careful not to smear it, or make it "stringy" as it will cloud up your acrylic.


After pre-cleaning the edges, and applying the solvent to the top of the tube, I layed on the top piece. Then I used a military stein full of pencils for weight. You know, a military stein, everyone has one of those laying about!


Once you get the glue to dry totally, you can polish the tube with plastic cleaner Brilliant sollution. Any acrylic polish will work, but this stuff is the tops.

This is the test fit in the completed tube!

Curved Acrylic Display Case

Saturday, May 18, 2013

Verlinden Resin Kits (Medieval Archer)

 When I was coming up in modeling, I HATED to paint figures. Any figures, 1/72, 1/48 and certainly 1/35 scale! As I got older, and realized that history and specifically military history, was not always about the latest and most wazoo weapon. It was and always will be about the warrior. I am still in the military, and as there are more days behind in my career than ahead it strikes me that in my life of service, it was not the grand campaigns or battles that seem to stick out at me, but moments. Moments where I was pretty sure the breaths I was taking were going to be my last.
 So what has this wonderfully dramatic set of statements have to do with figure modeling? Everything. Figure modeling is all about capturing a moment of a random representative of some precise point in history. I see the allure of that now. I have strived over the years to be a better figure modeler. It occurs to me that painting is really the crux of where it's at in figure modeling, if you are into assembly, your probably going to be disappointed in the 8.9 seconds it takes to assemble one!
Reading model mags over the years, it came to my attention that some of the most renowned kits of figures, and indeed one of the very few manufacturers at the time was Verlinden. This is a company that does primarily figures, but also detail and modification packs for other model kits. When I was younger these kits seemed VERY expensive for what you got. With the advent of ebay, I was able to purchase a few of these kits on the cheap (sub 20 bucks.) This particular kit caught my eye after
 reading the book Agincourt by Bernard Cornwell. (http://www.bernardcornwell.net/books/azincourt-2/). The book is about a longbowman named Hook. The story is about the English invasion of France with Henry V. Needless to say I was pretty inspired to capture that particular moment in history. As an additional caveat, one of my subordinates was having a birthday, and as his great passion was archery, I decided to build the kit for him.
This is how the kit turned out. The present was well received, and I found the project very relaxing. As is with most figure models the hours spend painting are well applied. If you muss it up a bit you can wait 30 minutes and reapply a different shade or color and try again.
I highly recommend Verlinden kits to anyone to try out. If you don't think your ready to tackle "fleshy" subjects, pick one of their figures wearing armor or masks.